Click Here For More Info


Click Here For More Info

Mini PCVR Series Power Conditioner, Voltage Regulator


Mini PCVR Series Power Conditioner, Voltage Regulator

Typical Specifications, Technical Data & Common Options

Application
Power Rating/Size (kVA) 1, 1.5, 2, 3, 5, 7.5, 10, 15   Larger sizes available
Phase - Frequency (Hz) Single phase - 50 or 60 Hz
Voltages 120, 208, 220, 240, 380, 400, 440, 480, 600 typical   Custom voltages available For voltage step up or step down contact factory
Cable Entry - Connections Side, bottom or top – hardwired to terminal blocks
Regulation
Standard Regulation +10%/-25% input voltage with output voltage regulated to ±3%
Optional Regulation ±10% input voltage with output voltage regulated to ±2%
Regulation Variation None - constant for 0 to 100% load and any load power factor
Operating Characteristics
Overload/Inrush Capability 6000% - 1 cycle, 1000% - 1 second, 500% - 5 seconds, 200% - 1 min.; 1000% fault clearing
Minimum Load No minimum load
Load Power Factor No limitations, compatible with all load types
Tap Switching No load current interruption or waveform distortion on switching
Zero Crossing Sensitivity Tap switching independent of load current zero crossing
Harmonic Distortion No distortion added at any load or power factor
Response Time 1 cycle typical regardless of load or load power factor
Efficiency 99%
Operating Frequency ±3% of nominal frequency
Unit/Load Protection
Surge Suppression Tested to ANSI/IEEE standard C62.41
Failsafe Electronic Bypass Actuates on hi-temperature, over-current, component failure without loss of load
Construction
Technology Electronically-controlled tap switching series transformer design
Switching Semiconductors SCRs are not required to carry full unit current – non-full power semiconductors
Controls Microprocessor-based controls
Cooling Natural convection, no cooling fans used
Autotransformer Meets ANSI specs
Enclosure NEMA 1 standard
Environmental Requirements
Audible Sound Level Meets NEMA standards
Temperature - Humidity Ambient 32 to 104°F (0 to 40°C) – Relative humidity 0-95% non-condensing
Operating Altitude 0 to 10,000 ft (3000m)
Common Options
Split Phase Output 220/110v, 240/120v output
Enclosures NEMA 12, 3R, 4X or others
Listings Contact factory for specifics

Mini PCVR Series Power Conditioner, Voltage Regulator

Weights & Dimensions

Weights & Dimensions (Standard 1 phase, 60 Hz units)*
kVA Rating Weight Dimensions – inches (cm)
  Lbs (kg) Height Width Depth
1 40 (18) 20 (51) 16 (41) 10 (26)
1.5 45 (21) 20 (51) 16 (41) 10 (26)
2 50 (23) 20 (51) 16 (41) 10 (26)
3 60 (27) 20 (51) 16 (41) 10 (26)
5 85 (39) 20 (51) 16 (41) 10 (26)
7.5 120 (54) 30 (76) 20 (51) 10 (26)
10 150 (68) 30 (76) 20 (51) 10 (26)
15 200 (91) 36 (92) 24 (61) 12 (31)

* Notes on weights and dimensions:
Standard, 50 Hz units will weigh approximately 10% more than standard, 60 Hz unit

Please call 800.876.9373 or email us . We can provide the technical assistance you need to select the proper Power Conditioner or UPS SYSTEM for your needs.

Visit the Power Solutions Store
to see our complete line of products.


Search Power Solutions
The "Common Power Problems" guide will give you a clear understanding of the causes and effects of specific power problems and of the most effective solutions.