LDP20-120-1

Model LDP20-120-1

for 120 VAC, 2-Wire + Ground

• SPD Category and Type: Service entrance or service panel, permanently connected.
  Intended for use on U.S., TN-C, TN-C-S and TNS neutral grounding.
  
• Technology: Multiple Metal Oxide Varistors, with individual current fusing and thermal
  disconnects for each MOV. LED indicates proper functioning of L-N MOVs.
  
• Service Amperage / Fault Current: 200 A max / 10,000 A max short circuit current. If a dedicated
  breaker is used, it should be >20A at main panel or >10A at subpanel.
  
• Connection Means: In parallel across mains or behind breaker.
  
• Maximum Continuous Operating Voltage, 50-60 Hz, L-N: 138 VAC
  
• Protection Modes: L-N N-G
  
• Varistor MCOV: 150 VAC
  
• Varistor Voltage at 1 mADC: 240 V
  
• Leakage, L-N at 120 VAC: <250 mA
  
• Maximum Surge Current, Single Pulse, 8/20 ms: 20 kA
  
• Suppression Voltage L-N, N-G 500 A, 100 kHz (6 kV): 445 V
  
• Suppression Voltage L-N, N-G 500 A, 8/20 s (6 kV): 420 V
  
• Suppression Voltage L-N, N-G 3 kA, 8/20 s (6 kV): 480 V
  
• Suppression Voltage L-N, N-G 10 kA, 8/20 s (20 kV): 690 V
  
• UL 1449 Suppression Voltage, L-N: 500 V
  
• Surge Energy Capability, total: 1360 joules
  
• Surge Life, 120 VAC L-N applied 3 kA 8/20 s: 3000 times
  
• Surge Life, 120 VAC L-N applied 10 kA 8/20 s: 75 times
  
• Component Response Time: <1 ns
  
• Operating Temperature: -40 to +80 C
  
• Operating Altitude: 5000 m
  
• Shipping Weight: .5 kg
  
• Safety Approvals: UL and cUL Listed per UL1449 and Canadian Codes, File No. E74944