SUVT20KF2B4S

APC Smart-UPS VT Rack Mounted 20kVA 208V w/2 battery modules expandable to 5, w/PDU & startup

APC Smart-UPS VT, 20000VA/16000W, Input 208V 3PH/Output 120V, 208V, 208V 3PH, Extended runtime model

Includes: CD with software, Installation guide, Power modules ship installed, Smart UPS signaling RS-232 cable, Start up included, User Manual, Web/SNMP Management Card

Technical Specifications:

Output
Output Power Capacity: 16000 Watts / 20000 VA
Max Configurable Power: 16000 Watts / 20000 VA
Nominal Output Voltage: 120V,208V,208V 3PH
Output Voltage Note: Configurable for 200 : 208 or 220V 3 Phase nominal output
Efficiency at Full Load: 93.80%
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 57 - 63 Hz for 60 Hz nominal
Crest Factor: Unlimited
Waveform Type: Sine wave
Output Connections: (1) Hard Wire 5-wire (3PH + N + G) and (5) NEMA L21-20

Input
Bypass: Built-in Maintenance Bypass, Built-in Static Bypass
Nominal Input Voltage: 208V 3PH
Input Frequency: 40 - 70 Hz
Input Connections: Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations: 160 - 240V
Other Input Voltages: 220
Maximum Input Current: 53A
Input Breaker Capacity: 80A

Batteries & Runtime
Battery Type: VRLA
Included Battery Modules: 2
Available Battery Slots: 3
Typical recharge time: 3 hour(s)
RBC Quantity: 2
Typical Backup Tim at Half Load: 18.1 minutes (8000 Watts)
Typical Backup Tim at Full Load: 5.5 minutes (16000 Watts)

Communications & Management
Pre-Installed SmartSlot Cards: AP9619
Control panel: Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms : configurable delays
Emergency Power Off (EPO): Yes

Physical
Maximum Height: 78.54 inches (1995 mm)
Maximum Width: 23.62 inches (600 mm)
Maximum depth: 42.32 inches (1075 mm)
Net Weight: 1244.00 lbs. (565.45 kg)
Shipping Weight: 1321.00 lbs. (600.45 kg)

<< Return to APC Smart UPS