1.800.876.9373

Deka HRC

Deka HRC batteryDeka HRC batteries, from East Penn, are designed for high rate and peak performance applications. They are the newest offering in the proven line of Deka products, built to be sustainable and economical and to provide superior performance in critical applications. 

East Penn Manufacturing created the Deka HRC product line utilizing three key design features; Engineered Alloys, Compu-Press Grids, and Hydro Formation. Engineered Alloy, a blend of lead and alloys to match the battery’s intended service needs, is most beneficial for batteries in the field. East Penn has been perfecting the best blend and building it into its premium line Deka High Rate batteries for decades, and it’s an integral part of the new Deka HRC. Compu-Press is an exclusive process that produces an optimized battery grid ideal for high rate applications. The core of this proven process is rolling metal to enhance its strength beyond its original state. The combination of the proprietary alloy blend with the Compu-press grids and hydro formation manufacturing process allow East Penn’s HRC to provide more power in a smaller footprint compared to other manufacturers.

All of East Penn’s research, development and engineering expertise has created a better product for high rate applications.

Deka HRC Features

  • 12-volt monobloc battery available in top access design
  • Engineered alloys formula with high lead purity, optimizing power delivery and life compared to a strictly pure lead battery
  • Exclusive Compu-press grid technology optimizes energy transfer to maximize high rate power
  • Proprietary Hydro-formation process consistently and efficiently forms the entire battery 
  • Advanced AGM technology for superior high rate, short term power
  • Reinforced case resists bulging and meets safety requirements (UL 94 V-0)
  • Epoxy-sealed posts eliminate leaks
  • Flame arresting, low pressure, self-sealing valves are all 100% factory tested
  • Exceeds IEEE-1188 standards
  • Constant power discharge
  • String ≥ 100% capacity — All individual batteries ≥ 95% capacity
  • Conductance readings taken before the test
  • Battery voltage recorded on report every 2 minutes
 

Deka HRC950 Specifications

Nominal Voltage: 12-Volts 
Rating: 914 Watts/Cell @ 5 min. rate to 1.67 V.P.C. 
Positive Plate: High tin, low calcium alloy 
Negative Plate: Calcium alloy 
Post Seal: Epoxy-sealed 
Terminal: Top access, 1/4″ – 20 threaded insert 
Case/Cover: Flame retardant, polypropylene – UL94 rated per UL1778 requirements 
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor 
Float Voltage: 2.25 V.P.C. ± 0.01 V.P.C. @ 77°F (25°C) 
Design life: 10 years in float applications @ 77°F (25°C) 
Dimensions: 13.46 in L x 6.84 in W x 11.21 in. H  
Weight: 93 Ibs. 
For more in-depth specification, see the HRC950data sheet
 

Deka HRC800 Specifications

Nominal Voltage: 12-Volts 
Rating: 780 Watts/Cell @ 5 min. rate to 1.67 V.P.C. 
Positive Plate: High tin, low calcium alloy 
Negative Plate: Calcium alloy 
Post Seal: Epoxy-sealed 
Terminal: Top access, 1/4″ – 20 threaded insert 
Case/Cover: Flame retardant, polypropylene – UL94 rated per UL1778 requirements 
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor 
Float Voltage: 2.25 V.P.C. ± 0.01 V.P.C. @ 77°F (25°C) 
Design life: 10 years in float applications @ 77°F (25°C) 
Dimensions: 12.93 in L x Width – 6.84 in W x 8.70 in H
Weight: 71 lbs.
For more in-depth specifications, see the HRC800 data sheet.

For more information about Deka Batteries,
call 800-876-9373 or email sales@power-solutions.com.