1.800.876.9373

Integrated Power Systems and Services Unibody Enclosure

Enclosures | Industrial and Outdoor Enclosures | Integrated Power Systems and Services Unibody Enclosure

Integrated Power Systems and Services Unibody EnclosureThe Integrated Power Systems and Services Unibody Enclosure,  UL Type 12, 3R, 4, 4X, is an indoor/outdoor industrial enclosure designed for backup power systems in challenging or alternative applications. Mission critical equipment needs protection from the environment to ensure uptime. Unibody enclosures protect equipment against the ingress of dust, lint and other debris, as well as varying levels of protection against liquids.

Integrated Power Systems and Services enclosures are easily customizable with interior and exterior fittings and accessories, such as heating/cooling, sensors, and biometric and RFID door handle locks, to meet your requirements. They can be engineered or modified to meet nonstandard specifications.

Integrated Power Systems and Services Unibody Enclosure Options

  • Custom Dimensions – up to 98” height
  • Flexible widths and depths
  • Baying kit – securing multiple enclosures together (multi-door)
  • Custom door-sill height sub-floor for mounting free-standing devices
  • RAL or custom colors available
  • Custom door configurations
  • Alarm signaling – flashers, sounders, light stack

Integrated Power Systems and Services Unibody Enclosure Features

  • Welded, mild-steel or stainless steel
  • Mounting channels along the top, bottom and sides of enclosure’s interior
  • 2 sets (4 rails) 19” rack rails for rack-mount UPS applications
  • 6U, 12U, 18U, 30U, 42U
  • 24”W X 40”D
  • Powder coat finish corrosion-resistant – RAL 7035
  • Lift eyes, sunshield, full interior insulation standard
  • Single door, dual access (door front/rear)
  • Keyed 3-point latch/locking handles
  • Sealed with formed-in-place foam gasket technology
  • 4” plinth style fork lift base with anchor blocks in each corner
  • Removable sidewall gland plate for conduit entry
  • UL, NEMA and IP-rated
  • UL and IEC-listed and recognized power system components
  • Enclosure systems carry ETL/UL508A certification

Hydrogen Mitigation is available for Type 3R, 4(X) outdoor applications

  • Hydrogen sensors
  • Active venting system
  • Passive ventilation ports

Battery Off-Gassing Mitigation

  • For enclosure applications requiring VRLA-type batteries installed in a sealed, Type 4/4X/6 enclosure
  • Used in conjunction with Hydrogen Sensor-H2 Relays control input power and actuate mechanical louvers and 500CFM ventilation fan
  • Thermostatically controlled
  • 1% H2 concentration visible alarm and notification through relay contacts (N.O. or N.C.)
  • 2% H2 concentration visible alarm and additional notification through relay contacts and system shutdown

Enclosure XL Polyvent Protective Vent Kit

  • RMR Enclosure XL Polyvent Protective Vent Kit provides ventilation and equalizes air pressure in the event of drastic temperature changes
  • Vent ports allow air and hydrogen mix to vent out of the enclosure passively, while keeping moisture and humidity out of the enclosure

For more information about Integrated Power Systems and Services Unibody Enclosures,
call 800-876-9373 or email [email protected].