Trystar HV Series

The Trystar HV Series UPS, 7.5kVA to 25kVA, is a single phase, seamless transfer, uninterruptible power system providing premium power to linear or non-linear loads. loads. The overall function of the HV Series is to take fluctuating, and erratic electrical power and purify it, resulting in well-regulated, clean, uninterrupted, computer-grade power. Up to 15 minutes of internal battery backup is provided, model-dependent, with external battery options available providing several hours of runtime at full load.

The HV Series UPS maintains electrical power to the critical load for 10 minutes to several hours. The backup time is a function of the amount of battery reserve that is purchased with the system.

Trystar HV Series Features

• Steady, Regulated Voltage to ±3% Extends Equipment Life
• Highest Level Performance Sine Wave Output
• 100% Power Conditioning
• No-break, Continuous Power Provides Seamless Switching to Battery Backup
• Audible Noise 50 – 55dB (model dependent)
• Field Expandable Power Rating and Battery Run Time
• Eliminates Unwanted Harmonic Frequencies From Incoming Line
• 93% Typical Efficiency – Proven Performance
• K-Factor 30
• Optional Extended Backup Time
• Optional NetMinder UPS Communications Software and Hardware
• Optional Internal and External Bypass
• Optional oversized charger for faster recharge time

Trystar HV Series Specifications

• Voltage Regulation: +/3%
• Load Regulation: typically better than +/- 3%
• Overload Capability: 125% for 10 min
• Surge Capability: 150% of rated output
• Input Operating Range: +10 to -15% of nominal voltage
• Input Current THD: < 10%
• K-Factor: 30 or better
• Operating Temperature: 0°C to 40°C
• Common Mode Noise Attenuation: 120dB
• Transverse Mode (Line) Noise Attenuation: 70dB
• Spike Attenuation 3000:1
• Crest Factor 3.5:1
• UL 1778 Listed;  C-UL Listed to CSA C22.2 No. 107.1-21

For more in-depth specifications, see the data sheet.