Trystar Model LTN

The Trystar Model LTN UPS, 700VA – 2.1kVA, with a drip-proof enclosure is designed to NEMA 2 standards and provided on channels for floor mounting. Optional wall-mounting brackets are available.

Within each Model LTN UPS is a rugged constant voltage transformer which provides output line voltage regulation of ±3%. In addition, magnetic isolation, filtering, and power conditioning provide ultimate protection from extreme power line disturbances and power outages. 

Trystar Model LTN Features

• No break, regulated, continuous sine wave output
• Integral constant voltage transformer isolates and regulates output voltage
• NEMA 2 drip-proof enclosure design
• Status and alarm panel, with optional remote status panel
• Internal battery options, providing extended runtimes from 30 minutes to 7 hours at full load, model dependent
• Input breaker and output breakers (up to 6 single pole positions total)
• Output circuit breaker monitor option
• Standard 3 amp or optional 8.5 amp battery charger
• Key-lockable front door
• Front access design
• Generator compatible
• Remote communications via alarm signals or RS232.
• Optional four (4) isolated sets of status & alarm relay contacts.
• Optional NetMinder™ remote monitoring via Ethernet TCP/IP, MODBUS TCP, or MODBUS RS485
• Optional wall mounting kit
• Input and output main circuit breakers
• Flush-mounted status and alarm panel
• Optional 8.5 amp accelerated, temperature-compensated battery charger

Trystar Model LTN Specifications

• Input Operating Voltage Range: +10%, -40% typical, load-dependent, without battery usage
• Input Frequency: 60 Hz, ± 2.5 Hz
• Output Sine wave Voltage: Maximum 3% harmonic distortion, any single harmonic
• Voltage Regulation: ± 3% typical
• Isolation: Galvanic
• Operating Temperature: 0° C to 40° C (32° F to 104° F)
• Total System MTBF: 100,000 hours
• Common Mode Noise Attenuation: 120 dB
• Transverse Mode Noise Attenuation: 70 dB
• Efficiency: 89% typical

For more in-depth specifications, see the data sheet.