Tripp Lite Rack Mount SRCOOL7KRME

Cooling Solutions | Tripp Lite Cooling | Tripp Lite Rack Mount SRCOOL7KRME

Tripp Lite Rack Mount SRCOOL7KRMEThe Tripp Lite Rack Mount SRCOOL7KRME Cooling Unit, by Eaton, 8U, 9,000 BTU (2.7 kW) uses efficient close-coupled cooling to prevent equipment shutdowns and malfunctions due to overheating. The SRCOOL7KRME, uses R32 refrigerant to pump 9,000 BTU/h (2.7 kW) ASHRE of cooling into the IT space. R32 has a significantly lower global warming potential (GWP) compared to traditional refrigerants, which helps reduce the overall impact on climate change and comply with regulations.

The SRCOOL7KRME rack mount cooling unit is self-contained. The chassis mounts in 8U of space at the bottom of an EIA-standard rack enclosure to save floor space in a small-to-medium-sized data center, server room, network closet or other environment with heat-sensitive rack equipment. A directional output vent aims the air upward, directly at rack equipment. 

Close-coupled air conditioning delivers cold air near heat loads to discourage recirculation and increase energy efficiency as much as 39 percent. Because it only cools the equipment inside the rack enclosure, it is much more efficient than solutions that cool an entire room to achieve the same result. It also filters the air, and its built-in evaporator eliminates condensation with no floor drain or water collection tank needed.

With a bottom-mounting configuration only, with the enclosure’s floor open and no tray or pan below the unit. Evaporator coils can be vented through the enclosure’s rear perforated doors or optional duct. In an open frame application, cooling air delivered to the equipment is lessened, since cold air escapes into the room. Condenser must be ducted.

Tripp Lite Rack Mount SRCOOL7KRME Cooling Features

  • 9,000 BTU/h (2.7 kW) ASHRE prevents heat-related equipment malfunctions and downtime
  • Lower-GWP with R32 refrigerant and up to 39% more energy efficient 
  • Optional network management card enables remote monitoring and control
  • Compliant to the highest efficiency standards by CEC, DoE, NRCAN and EPA/AIM
  • Mounts in 8U of space at the bottom of an EIA-standard 19 in. rack enclosure

Tripp Lite Rack Mount SRCOOL7KRME Cooling Unit Specifications

Electrical Consumption (Max)1020 Watts
Nominal Input Voltage(s) Supported120V AC
Nominal Input Voltage Description120V AC 60 Hz
Input Connection TypeNEMA 5-15P
Input Plug FeaturesNEMA 5-15P
Voltage Compatibility (VAC)120
Input Frequency60 Hz
Input Cord Length (ft.)

7

Frequency Compatibility

60 Hz

Cooling Capacity (BTUs)

ASHRE capacity (35/28.3℃) 9,000 BTU, CRAC Capacity (35/20℃) 6,500 BTU, CSA370 Capacity (27/19℃) 7,000 BTU

For more in-depth specifications, see the data sheet

For more information about Eaton Tripp Lite Rack Cooling Unit,
call 800-876-9373 or email [email protected].