Wall Mount SmartRack SRCOOL2KWM

Cooling Solutions | Tripp Lite Cooling | Wall Mount SmartRack SRCOOL2KWM

Wall Mount SmartRack SRCOOL2KWMThe Wall Mount SmartRack SRCOOL2KWM, 120V Air Conditioner, 2,000 BTU (0.6 kW), is a self-contained cooling system that filters, dehumidifies and cools air and directs it toward equipment stored in wall-mount rack enclosures and network closets with no access to facility air conditioning. It mounts to the top of your wall-mount rack enclosure and delivers 2,000 BTU of close-coupled cooling power to the equipment mounted within the cabinet. This space saving solution helps prevent shutdowns and other equipment failures caused by overheating.

Ideal for server rooms and other IT environments with limited floor space, the SRCOOL2KWM is more efficient than units that cool an entire room, because the magnetic air scoop attached to the front of the unit pushes the cool air directly toward your equipment. A built-in evaporator eliminates condensation, so no water collection tank or floor drain is required. No plumbing or special circuits are needed, so setup is quick and easy.

The SRCOOL2KWM restarts automatically after power failures and the user-friendly control panel lets you schedule unattended shutdowns and restarts, adjust the temperature and set other operating conditions. By adding the optional SRCOOLNET2LX module you can convert this unit into a managed network device via web browser, NMS or telnet. It allows you to monitor and adjust temperature and humidity remotely, access activity logs and receive alerts via email, SMS or SNMP.

Wall Mount SmartRack SRCOOL2KWM Features

  • Mounts to most wall-mount rack enclosures with ventilated door
  • Provides 2,000 BTU (0.6 kW) of cooling capacity
  • 6-ft. (1.83 m) power cord with NEMA 5-15P plug
  • User-friendly control panel with LCD display and diagnostic LEDs
  • Temperature control 63-86 deg F
  • Supports optional remote management via Ethernet
  • 1-year limited warranty
  • Close-coupled energy-saving cooling directed at equipment instead of whole room
  • Recommended for IT environments with limited floor space
  • Eco-friendly R134A refrigerant meets environmental standards
  • Restarts automatically after power failures
  • Intuitive push-button control panel features LCD display and diagnostic LEDs
  • Operates at noise levels comparable to an average office setting
  • Temperature control 63-86°F
  • Optional Remote Management
  • Easy Installation
  • Built-in evaporator eliminates condensation—no floor drain or water collection tank needed

Wall Mount SmartRack SRCOOL2KWM Specifications



Electrical Consumption (Max)

276 Watts

Nominal Input Voltage(s) Supported

120V AC

Input Connection Type

NEMA 5-15P

Input Plug Features

NEMA 5-15P

Input Frequency

60 Hz

Input Cord Length (ft.)




Cooling Type



Evaporator = 78 CFM / Condenser = 130 CFM

Cooling Capacity (BTUs)


Cooling Capacity (kW)






Material of Construction


Form Factors Supported

Wall Mount

Shipping Dimensions (hwd/in.)

16.90 x 19.60 x 23.60

Shipping Weight (lbs.)


Unit Dimensions (hwd/in.)

11.100 x 13.500 x 13.500

Unit Weight (lbs.)



For more information about Tripp Lite Cooling Solutions,
call 800-876-9373 or email [email protected].