The Power Experts

CLEANSOURCE PLUS MMS UPS

CLEANSOURCE PLUS MMS UPSThe Active Power CLEANSOURCE PLUS MMS UPS, 300kW to 2400kW, 480V, offers a wide range of modular and redundant backup power systems and offers 20% more power within the same footprint. These systems, capable of multiple redundancy levels, can be readily expanded by adding further modules as needed. In total, 8 modules can operate in a single system, providing up to 2400kW of high efficiency, battery-free UPS power.

The built-in flywheel energy storage delivers efficiency up to 98% and lowers total cost of ownership by up to 40%. This field-proven technology is based on a highly fault tolerant IGBT architecture that is designed to protect all critical loads, such as data centers, industrial processes and healthcare applications. These models are Made in the USA.

Stored energy will provide ride-through for up to 2 minutes depending upon configuration, making the CLEANSOURCE PLUS MMS a clear alternative to modular static UPS  systems with batteries. The MMS modular has more than enough energy storage for diesel starting and synchronization, even when paralleling generating sets. Elimination of batteries saves space and weight, reduces site testing and maintenance and removes the need for routine replacement after a few years of service life.

CLEANSOURCE PLUS MMS UPS Features

  • Extended Ride – through up to 2 minutes
  • Up to 98% efficient
  • Smaller footprint – requires only 50% space of battery-based UPS
  • Field expandable
  • Redundant fans and control power units
  • Wide ambient temperature range – ideal for rugged applications
  • Lower cooling requirements
  • Lower maintenance and service
  • Cost-effective installation
  • Color LCD touch-screen display
  • Remote monitoring
  • Built-in power factor correction
  • Generator compatibility
  • Dual input and integrated maintenance bypass option
  • Seismic provisions
  • 20 year design life
  • 300kW building blocks expandable to 2400kW

Flywheel Technology Features

  • Stores 6.2 MJ of energy; up to 2 minutes of runtime (load dependent)
  • Wide ambient temperature range 32oF to 104oF and high density, high efficiency design
  • Over 96% efficient at 40% load
  • No need for dedicated cooling for batteries
  • Routine annual check-up and bearing change every third year
  • Integrated flywheel with 20-year life

CLEANSOURCE PLUS MMS UPS Specifications

PLUS MMS 300 PLUS MMS 600 PLUS MMS 900 PLUS MMS 1200
Rating
Maximum kVA 333 667 1000 1333
Maximum kW 300 600 900 1200
Input
Voltage 480 VAC 3-phase, 3-wire plus ground (4-wire optional)
Voltage Range +10%/-15% (programmable)
Frequency 60Hz
Power Factor 0.99 at rated load and nominal voltage
Output
Voltage 480 VAC 3-phase, 3-wire plus ground (4-wire optional)
Voltage Regulation Steady State: +/-1% for +/-10% input
Flywheel Mode: +/-1% steady state
Transient: +/-1% within 50mSec for 100% load step
Frequency 60Hz
Current – Nominal 480VAC 400A 800A 1200A 1600A
Energy Storage
Type Integrated Steel Flywheel spinning at 10,000RPM
Flywheel Run Time 100%: 20s
75%:27s
50%: 39s
25%: 73s
Flywheel Recharge Time ˂3 min nominal at 65kW
Internal Maint. Bypass Panel Optional
Operating Temperature 32 to 104°F
Height 78 in.
Width 127 in. 170 in. 213 in. 256 in.
Depth 34 in. 34 in. 34 in. 34 in.
Weight 6,750 lbs. 11,250 lbs. 15,750 lbs. 20,250 lbs.
Cable Entry Top or Bottom

For more in-depth specifications, see the data sheet.

For more information about Active Power Flywheel UPS systems,
call 800-876-9373 or email sales@ppower-solutions.com.