1.800.876.9373

Schneider Electric Uniflair Chilled Water InRow Cooling

Cooling Solutions | Schneider Electric Uniflair Series | Schneider Electric Uniflair Chilled Water InRow Cooling

Schneider Electric Uniflair Chilled Water InRow Cooling closely couples cooling with the heat source thereby improving predictability and efficiency. With intelligent controls that actively adjust to match the load, the Uniflair CW InRow addresses the dynamic demands of today’s IT environments. Available in various configurations, these units meet the diverse requirements for data center cooling. IT operators looking to improve efficiency or deploy higher density equipment will benefit from the modular design ideal for closets, server rooms, and data centers.

Schneider Electric Uniflair Chilled Water Benefits

  • Design prevents hot air recirculation, while improving cooling predictability and allowing for a pay as you grow environment
  • Modular Design allows for future deployment of higher density equipment 
  • Intelligent controls actively adjust fan speed and water flow to match the IT heat load to maximize efficiency 
  • Modular Components simplify replacement and reduce mean time to repair
  • Row based equipment allows for all serviceable components to be replaced/maintained in the hot or cold aisles
  • Easy to maintain, cleanable, deep loading mesh filter removes particles from the return air stream
  • Active Response Controls monitor and actively adjust cooling capacity to ensure proper server inlet temperatures
 

Schneider Electric Uniflair Chilled Water Models

 

Uniflair InRow CW ACRC301S

The Schneider Electric Uniflair InRow CW ACRC301S (standard temp), up to 40kW, offers close-coupled cooling for closets, server rooms, and data centers. The 300mm, ACRC3015 provides improved predictability and efficiency and intelligent controls that actively adjust to match the load.

  • Variable speed, hot-swappable fans reduce energy consumption during off-peak hours and allow system to remain operational if a replacement is required
  • 4.3” Touch screen display for easy navigation and configuration
  • New door design allows more airflow with supplemental sideair distribution
  • Slide out electrical box for easy access
  • Intelligent controls offer network manageability, real time capacity monitoring, predictive failure notification, and rack inlet temperature control
  • Top or bottom piping / power connections
  • Dual A-B power inputs offers redundancy and protection
  • Remote probe ensures proper inlet temperature to IT equipment
  • Condensate management –factory installed pump removes water from the unit, ensuring continuous operation

ACRC301S Specifications

  • Increased cooling capacity
    – Up to 40kW
    – 3200 CFM (5437 CMH) max airflow (Conditions @45F EWT, 120F RAT, 12F dT)
  • Improved Energy Efficiency: 1.0kW at maximum Operating Condition
  • 4.3″ User friendly touch screen
  • 100 – 240V, 1-ph, 50/60Hz Integrate capacity
  • Compatible with Cooling Distribution Unit (CDU)
  • Thermal containment and active airflow control compatible
For more in-depth specifications, see the data sheet.

 

Uniflair InRow CW ACRC301H

The Schneider Electric Uniflair InRow CW ACRC301H (high temp), up to 60kW, offers close-coupled cooling for closets, server rooms, and data centers. The 300mm, ACRC301H provides improved predictability and efficiency and intelligent controls that actively adjust to match the load.
 
  • Economization and free cooling 
  • Variable speed, hot-swappable fans reduce energy consumption during off-peak hours and allow system to remain operational if a replacement is required 
  • Passive noise control foam fan bezels 
  • 4.3” Touch screen display for easy navigation and configuration 
  • New door design allows more airflow with supplemental side-air distribution 
  • Slide out electrical box for easy access 
  • Intelligent controls offer network manageability, real time capacity monitoring, predictive failure notification, and rack inlet temperature control 
  • Top or bottom piping / power connections 
  • Dual A-B power inputs offers redundancy and protection 
  • Remote probe ensures proper inlet temperature to IT equipment 
  • Dew Point Control Pump –internal pump recirculates return water to keep coil temperature above dew point and prevent condensation 
 

ACRC301H Specifications

  • Increased Cooling Capacity
    Up to 60 kW 
    4200 CFM (7136 CMH) max airflow (Conditions @ 55F EWT, 120F RAT, 12F dT) 
  • Economization – Higher entering water temperatures 
  • Dewpoint Control – Ensure coil temperature is always above dew point – Results in no condensate 
  • Energy Efficient – 1.9 kW @ maximum operating condition 
  • 4.3” User Friendly Touch Screen 
  • 208-230V, 1-ph, 50/60Hz – Hardwired 
  • EcoAisle & Active Flow Control Compatible
For more in-depth specifications, see the data sheet.
 
 

Uniflair InRow CW ACRC600

The Schneider Electric Uniflair InRow CW ACRC600, up to 60kW, offers close-coupled cooling for closets, server rooms, and data centers. The 600mm, ACRC600 provides improved predictability and efficiency and intelligent controls that actively adjust to match the load.

  • Variable speed fans reduce energy consumption during off-peak hours 
  • Intelligent controls offer network manageability, real time capacity monitoring, predictive failure notification, and rack inlet temperature control 
  • Top or bottom piping / Power connections 
  • Dual A-B power inputs offers redundancy and protection (Cooling only units) 
  • Remote probe ensures proper inlet temperature to IT equipment 
  • Electric reheat controls temperature during dehumidification (Optional) 
  • Humidifier maintains moisture level (Optional) 
  • Condensate management –factory installed pump removes water from the unit, ensuring continuous operation 
  • Casters allow for easy movement

ACRC600 Specifications

  • High Cooling Capacity – Up to 70 kW – 6000 CFM (10194 CMH) maximum airflow
  • Optional Humidification & Reheat – Integrated and automatically controlled
  • Voltage Options – 200-240V, 460-480V, & 380-415V – 3 phase 50/60 Hz
  • Energy Efficient – 3.3 kW maximum (cooling only units) – 15 kW maximum (with reheat and humidification) 
  • EcoAisle & Active Flow Control Compatible

For more in-depth specifications, see the data sheet.

For more information about Schneider Electric InRow Cooling,
call 800-876-9373 or email sales@power-solutions.com.